Hyundai 2008 Santa Fe - Manual (Page 169)

1
157 157 157 157 157 157
FEATURES OF YOUR HYUNDAI
B445E02CM-AAT
1. SCAN button
Station scan function
Press the SCAN button for the tuner to
scan for radio signals in the selected fre-
quency band (AM or FM). Once the tuner
locks onto the signal of a transmitting sta-
tion, it plays that station for 5 seconds
before scanning for the next available sta-
tion in the selected frequency band.
If you want to keep listening to a particular
station and want to stop the scanning,
press the SCAN button again.
This function is useful for providing you
with a good overview of all the radio sta-
tions within range of your tuner.
Preset scan function
Press and hold the SCAN button for more
than 2 seconds. Each preset radio stations
will be automatically played for 5 seconds.
If you want to keep listening to a particular
preset station and want to stop the scan-
ning, press the SCAN button again.
2. SEEK '
∧∧∧∧∧
' and '
∨∨∨∨∨
' buttons
Automatic Station Selection function
Press the '
∧∧∧∧∧
' and '
∨∨∨∨∨
' buttons to scan up
and down the frequency range for the next
available radio station and automatically
lock on to that frequency.
The LCD screen displays the frequency of
the radio station transmitting a clear and
strong signal.
Use this function to search for a radio
station you want. If you like a particular
station, you can store it as one of 6 presets
using the Preset buttons described later.
NOTE:
This function is not effective if you are
experiencing poor reception in your vi-
cinity.
3. TUNE Knob
Manual Station Selection
Rotate the knob clockwise or counter-clock-
wise to manually advance up or down the
frequency range. The Tune knob also gives
you fine-grain control which you can use to
manually fine-tune your frequency selec-
tion. This is useful if you are searching for
a radio signal which is not strong enough
for you to use the Automatic Station Selec-
tion function
NOTE:
The speed at which you advance up or
down the frequency range depends on
how fast you turn the knob.