Hyundai 2008 Santa Fe - Manual (Page 217)

2 DRIVING YOUR HYUNDAI
6
C070C01E-1
LOCK
ACC
ON
START
C050A01E-1
STARTING
!
C070C01A-AAT
To remove the ignition key
C050A01A-AAT
1. Turn the ignition key to the "ACC" posi-
tion.
2. Simultaneously push and turn the igni-
tion key counterclockwise from the
"ACC" position to the "LOCK" position.
3. The key can be removed in the "LOCK"
position.
WARNING:
Never run the engine in a closed or poorly
ventilated area any longer than is needed
to move your car in or out of the area. The
carbon monoxide gas emitted is odor-
less and can cause serious injury or
death.
NOTE:
Do not hold the key in the "START" posi-
tion for more than 15 seconds.
o "ON"
When the key is in the "ON" position, the
ignition is on and all accessories may be
turned on. If the engine is not running, the
key should not be left in the "ON" position.
This will discharge the battery and may
also damage the ignition system.
o "ACC"
With the key in the "ACC" position, some
electrical accessories (radio, etc.) may be
operated.
o "LOCK"
The key can be removed or inserted in this
position.
To protect against theft, the steering wheel
locks by removing the key.
NOTE:
To unlock the steering wheel, insert the
key, and then turn the steering wheel and
key simultaneously.