Pt3000, Quick start guide – ikan PT3000 User Manual
Page 8
3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | [email protected] | © 2009 ikan Corporation. All right reserved.
1
2
3
Powering The Monitor. To do this, you have two options.
a) You can plug the AC power adapter into the power input jack.
See Figure 2.
b) You can connect a pro battery using the optional accessories, PBK17-S or PBK17-A (Pro Battery Kit)
and then plugging that plate into the DC-In connector.
Connecting PT3000 to your computer with VGA cable (not included in the PT3000 package).
3ft minimum for best viewing distance.
Figure1 - Rear view
Figure2 - Front view
PT3000
15” Monitor
Quick Start Guide
DC Power
Connection
VGA
Connection
DC 12V-24V
Power Connection
12V-24V
DC IN
VGA
12V 4A
15” Monitor
1. POWER
Power switch (I = On, O = Off)
2. >
While in MENU mode, toggle adjust setting
3. MENU
Access to all monitor settings: Brightness, Contrast, etc
4. <
While in MENU mode, toggle adjust setting
5. FLIP
Flip image horizontally
1
2
3
4
5
FLIP < MENU >
7 of 10