Insinger Admiral 44-4 - Manual (Page 15)

FUSE SIZING CHART
Admiral 44-4
electric heat
single-point electric
power unloader 60A 50A 35A 25A n/a
Admiral 44-4
electric heat
single-point electric
power loader
power unloader
60A 50A 35A 25A n/a
Admiral 66-4
steam or electric
15A 15A 10A 6A 25A
Admiral 66-4
steam or electric
power loader 15A 15A 10A 10A 35A
Admiral 66-4
steam or electric
power unloader
20A 15A 10A 10A 30A
Admiral 66-4
steam or electric
power loader
power unloader
20A 20A 10A 10A 30A
Admiral 66-4
gas heat
15A 15A 10A 10A 25A
Admiral 66-4
gas heat
power loader or unloader 20A 15A 10A 10A 30A
Admiral 66-4
gas heat
power loader and
unloader
20A 15A 10A 10A 35A
Admiral 66-4
electric heat
single-point electric
power loader or unloader
60A 50A 35A 25A n/a
Admiral 66-4
electric heat
single-point electric
power loader and
unloader
60A 60A 35A 30A n/a
Admiral 44-4¹
Admiral 66-4¹
electric heat
non-SPC
60A 45A 30A 25A 80A
Model 208VAC/3È 230VAC/3È 380VAC/3È 460VAC/3È 220VAC/IÈ
1 This circuit is required for all machines with electric tank heat that are not configured for single point connection.
CAUTION:
As with any 3 phase system, an electrician must check all motors for proper phasing,
i.e., pump motors must be running in direction indicated by arrow on housing.
PART 2 INSTALLATION INSTRUCTIONS
Admiral Series DOC ADM-ES 1.0 04 www.insingermachine.com 800-344-4802
13