Insinger QuadJet Aqua-Scrubber User Manual

Page 2

Advertising
background image

QuadJet Aqua-Scrubber DOC 2008

www.insingermachine.com 800-344-4802

Thank you for purchasing this quality

Insinger product.

On the space provided below please record the
model, serial number and start-up date of this unit:

Model:__________________________________

Serial Number:___________________________

Start-Up Date:____________________________

When referring to this equipment please have this
information available.

Each piece of equipment at Insinger is carefully
tested before shipment for proper operation. If the
need for service should arise please contact your
local Authorized Insinger Service Company.

A Service Network Listing is provided on our web
site, www.insingermachine.com or call Insinger at
800-344-4802 for your local authorized servicer.

For proper activation of the

Insinger Limited

Warranty a SureFire™ Start-Up & Check-Out
Service should be completed on your machine.
Refer to the Introduction section in this manual for
an explanation of Insinger SureFire™ Start-Up &
Check-Out Program.

Please read the Insinger Limited Warranty and all
installation and operation instructions carefully
before attempting to install or operate your new
Insinger product.

To register your machine for warranty by phone,
fax or the internet or for answers to question
concerning installation, operation, or service
contact our Technical Services Department:

Toll-Free

800-344-4802

Fax

215-624-6966

E-mail

[email protected]

Web

www.insingermachine.com

TECHNICAL SERVICE CONTACTS

TABLE OF CONTENTS

Part 1

Technical Information

Introduction

Catalog Cut-sheet

Warranty

3-15

Part 2

Installation and Operating Instructions

Installation Drawing

Operation and Cleaning Instructions

13-15

Part 3

Maintenance and Repair Procedures

Operation and Cleaning Instructions

Maintenance and Repair Procedures

Basic Service Guide

16

Part 4

Electrical Schematics & Replacement Parts

Machine Wiring Diagrams

Control Panel Layout and Component Drawing

17-26

Part 5

Replacement Parts

27-29

Advertising