Interlink Electronics 4-Zone FSR Mouse Sensor - Manual (Page 6)

www.interlinkelectronics.com
4
4-Zone Mouse Sensor
Integration Guide
4.0 Mounting
Mechanical installation of the 4-zone FSR has a few critical features that must be considered for
mounting.
To ensure proper registration of the sensor, crop marks made in the copper layer should be
included in the PCB layout. Sufficient registration accuracy is achievable by placing the FSR by
eye using the crop marks.
Figure 3: PCB copper layer showing crop mark locations and size/location of pads.
(All dimensions in millimeters)