Ivoclar Vivadent EP 600 Combi - Manual (Page 25)

25
5.5 Operating the menu /
key functions
5.5.1 Navigation
1
2
3
1 Information line
This line always shows the most current
temperature and operating mode.
Additionally, useful program information is
displayed.
2 Firing curve and dialog field
In this field, the dialogues and the various
information are displayed. The different
parameters may be changed here.
3 Function line
Change of level
1 level higher
Selector up
Selection within the same level
Selector down
Selection within the same level
Change of level
1 level lower
Selection key
Selection from various possibilities
The selection must always be confirmed
with ENTER.
The four function keys below the display are
used to navigate through the various menus.
The functions of the keys are represented by
symbols. These symbols are shown for those
keys, which have a certain function at the
current stage in the program. For example,
the symbol for the 'page down' key is only
shown if the contents of the current screen
take up more than one page.
5.5.2 Numeric keypad
The numeric keypad is used to enter
numbers. This keypad also contains the ESC
and ENTER keys.
5.5.3 Text input
The input of text is enabled by a virtual
keyboard shown on the display. F2 and F3
are used to select the characters. F4
transfers the selected, highlighted character
to the text field. F1 can be used to delete a
character from the text field. ENTER is used
to leave the text field and confirm the text.
If the user wants to quit this menu without
confirming the text, ESC is used.
5.5.4 Numbering of the various menus
To facilitate support, each menu is given a
number, which will become visible as soon
as the help function of the menu in question
is called up.
5.5.5 Display contrast
The display contrast can be regulated by
means of key 101.
If the unit has been in operation
for an extended period of time,
the display contrast properties may
change due to an increase in
temperature.
5.6 Help function
Pressing HELP will display a help text for the
current menu.
If the help text consists of several pages, the
'Up' (F2) and 'Down' (F3) symbols are
shown. They indicate that these keys may be
used to navigate between the individual
pages. F1 is used to return to the last active
menu.
5.7 Protocolling /
Output of protocols
From the press/firing program protocol
charts the protocols saved there can be
output. For that reason use key F2 to set the
cursor on position 'Print'. Subsequently,
enter the position number of the protocol to
be printed with the numbers’ block and
confirm with the ENTER key. Using key F4
the selected protocol can be sent via the
serial interface RS232 to the printer or PC
(Prograsoft).
Example press program protocol table:
Example firing program protocol table:
ESC:
Discarding values ENTER: Used to confirm
entered numbers, for
example, or the change
of the temperature mode
from °C to °F.