Kawai CN35 MIDI Manual - Manual (Page 6)

6
CN35 MIDI Settings Manual
MIDI Settings
Transmit Program Change Numbers
The Transmit Program Change Numbers setting determines whether the CN35 digital piano will transmit program
change information via MIDI when the instrument’s panel buttons are pressed.
 Transmit Program Change Numbers settings
Transmit PGM# Multi-timbral setting Effect of pressing panel buttons
On (default) Off, On1 SOUND buttons will send PGM# shown in the left column*.
On On2 SOUND buttons will send PGM# shown in the right column*.
Off Off Program Change information will not be transmitted via MIDI.
* Please refer to the ‘Program Change Number List’ on page 125 of “CN35 Owner’s Manual”.
1. Selecting the Transmit Program Change Numbers setting
After entering the MIDI Settings menu (page 2):
Press the  or  MENU buttons to select the Transmit Program
Change Numbers setting.
2. Changing the Transmit Program Change Numbers setting
Press the  or  VALUE buttons to turn the Transmit Program
Change Numbers setting on or off.
* Any changes made to the Transmit Program Change Numbers setting
will remain until the power is turned off.
* Preferred Transmit Program Change Numbers settings can be stored
to a Registration memory for convenient recall. Please refer to CN35
Owner’s Manual page 34 for more information.
 Program Change Numbers and Dual/Split mode
 When using Dual or Split mode, On/Off information and
sound type settings for are transmitted as exclusive data,
however program change numbers will not be transmitted.
 Program change numbers will also be transmitted when
Multi-timbral mode is set to On1 or On2.
4-4 Trans. PGM#
= On
4-4 Trans. PGM#
= Off
4-4 Trans. PGM#
= On