Kawai CN35 MIDI Manual - Manual (Page 8)

8
CN35 MIDI Settings Manual
MIDI Settings
Channel Mute
The Channel Mute setting determines which MIDI channels (1-16) are activated to receive MIDI information when
Multi-timbral mode is enabled.
* This setting is only available when the Multi-timbral Mode setting is set to ‘On1’ or ‘On2’.
 Channel Mute settings
Channel Mute Description
Play (default) The instrument will receive MIDI information on the specified MIDI channel.
Mute The instrument will not receive MIDI information on the specified MIDI channel.
1. Selecting the Channel Mute setting
After setting the Multi-timbral Mode to ‘On1’ or ‘On2’:
Press the  or  MENU buttons to select the Channel Mute
setting for each MIDI channel.
2. Changing the Channel Mute setting
Press the  or  VALUE buttons to alternate between ‘Play’ and
‘Mute’ settings
* Any changes made to the Channel Mute setting will remain until the
power is turned off.
* Preferred Channel Mute settings can be stored to a Registration
memory for convenient recall. Please refer to CN35 Owner’s Manual
page 34 for more information.
3. Exiting the Channel Mute setting
Press the  and  MENU buttons simultaneously to exit the
Channel Mute setting and return to the main settings menu.
4-5 Ch 1 Mute
= Play
4-5 Ch 1 Mute
= Mute
4-5 Ch 1 Mute
= Play