Kleenmaid DW26I - Manual (Page 10)

• 10 •
➀
ON/OFF BUTTON Press this button to power your machine.
PROGRAMMES BUTTON Press this button to select your programme.
START / CANCEL BUTTON Press this button to start or cancel the programme.
HEAVY WASH Press this button for“Special Pots” programme.
DELAYED END This enables you to : - Delay the programme’s finishing time
- Access the settings:
• For the current time
• To cancel the “Salt” and “Rinse” symbols
• To set the water softener.
DISPLAY A display providing information and for viewing the programme.
➀
➁
➂
➃
➄
Your dishwasher has been specially designed to make life easy for you with a simplified range of
programmes adapted to the most delicate china to the dirtiest pans.
➃ ➂ ➄ ➁
For information purposes :
Duration Water Electricity _____________________________________________________________ _
Normal 100 mins 15L 0.58 kWh
CHOICE OF PROGRAMMES
Prewash
This very short cycle, used without detergent, rinses dishes waiting to be washed the next day or
the day after.
Auto wash 60°C
An automatic programme adapted to the quantity of items and any amount of residue.
Your dishwasher optimises the results by prioritising the length of the programme.
Auto eco 50°C
An automatic programme adapted to the quantity of items and any amount of residue.
Your dishwasher optimises the results by prioritising the power consumption.
Normal 45°C
Recommended for normal soiled load. Less consuming in energy.
Delicate 45°C
A gentle programme perfect for fragile, delicate glassware and dishes with a small degree of
resistance to stains. Is also suitable for china that does not resist high temperatures.
Quick 40°C
A rapid wash programme recommended for slightly dirty, non greasy but fragile dishes.
➅
Heavy wash “Special Pots programme”: to select this specific programme, press the button and
“Start / Cancel”. This programme cancels any other programme selected.
Advantages: this programme enables you to clean pots and plates with dried-on, sticky residue
perfectly by washing them under high pressure with a cross-jet spraying system.
These values refer to normal conditions of use.
They may vary depending on the load, the
temperature, the hardness of the water or the
supply voltage.
➅