Kleenmaid DW26I - Manual (Page 16)

• 16 •
INSTRUCTIONS FOR CLEANING AND MAINTENANCE
Cleaning the waste filters
The filtration system consists of several
components:
A – The two-part waste filter
B – The main filter
C – The micro-filter The filters are located in the middle of the tub
and must be cleaned regularly to ensure
optimum washing results.
A
A - Two-part waste filters.
➀ ➀
Before removing the filters, remove any
waste from the main filter with a sponge to
avoid the waste blocking the sprinkling arms.
➁ ➁
Unscrew the waste filter a quarter turn and
remove it.
③ ③
Remove the main filter
④ ④
Remove the micro-filter.
Important: Do not
forget to lock the
waste filter by turning it a
quarter turn.
B
C
⑤ ⑤
Carefully clean all the filters
under running water.
To re-insert the filters
Follow the above instructions
in reverse.
C
Clean as necessary
• Underneath the filters, around the door and
the door joint with a damp sponge to remove
any deposit.
• Use only soap and water for the body and
control panel.
• Do not clean with abrasive powders, scouring
pads, spirit-based products or solvents.
Preferably use a cloth or a sponge.
• If you have a stainless steel door you may use
products adapted for stainless steel. See the
manufacturer’s instructions for advice on their
use.
We recommend using CSSPP - Stainless Steel
Liquid Pump cleaner. Please contact our After
Sales Service on 1300 652 100 or your nearest
store on 13 13 08.
Every year
To maintain your machine in perfect working
order you should clean it once or twice a year.
Run on “Heavy Wash” programme with the
machine empty and a special dishwasher
cleaning product available from any reputable
dealer.
Prolonged period of non-use
Clean your machine completely then unplug the
electricity supply and close the water tap.