Kleenmaid DW26I - Manual (Page 15)

• 15 •
INSTALLATION
Voltage : 230-240 V – 50 Hz – Fuses : 10 A
Power : 2150-2300 W
Capacity : 12 place settings
Water pressure : 3 psi/0.2 MPa min
100 psi/0.7 MPa max
Water evacuation pipe height : 60 cm - 1 m
Connection to cold water is recommended.
The dishwasher can use hot water pipe up to
65°C.
The maximum height does not include the
height of the feet.
INSTALLATION OF THE PANEL DOOR
1) If you use the door and false drawer, mount
the door using the plans supplied with the
machine.
Fix the false drawer equipped with an opening
handle to the top of the door using the 4 screws
supplied in the plastic bag (Fig. A).
The false drawer may be mounted level with the
door (Fig. B) or slightly raised (Fig. C) but should
not overlap by more than 3 mm maximum.
The handle on the false drawer fixing screw
heads must be flushed with the false drawer.
2) If using a one-piece panel, assemble using the
provided template.
Do not forget to add the 4 fixing screws
supplied in the plastic bag to the door.
Be careful to respect the 3 mm minimum
overlap between the top of the door and the
decorative panel (Fig. C).
Mount the door using the instructions and
template supplied with the machine.
3 mm
Max
Fig. B Fig. C
Dishwasher
door
Door panel
False drawer
635mm - 715mm
(panel 715 mm maximum)
Fig. A
4 fixing screws supplied in the plastic bag