TTI TCB-881 - Manual (Page 15)

ENGLISH
10. Trouble Shooting
11. CE Declaration
If you experience problems with your TCB-881 transceiver, first
check the power supply source. Poor connection of the power
supply source can cause problems such as no transmission,
no reception or poor reception, and weak or no sound. Ensure
that the microphone and antenna are also well connected.
If this does not solve the problem, reset your transceiver as
follows.
1) Switch off the transceiver.
2) Pressing M1 and M2 buttons at the
same time, switch on the transceiver.
This will reset the transceiver, so all the memories are erased
and the parameters return to the initial factory setting.
This should fix most problems. In case of further difficulty,
please consult your dealer or visit our website.
CE versions of the TCB-881 which display the
CE symbol on the product label, comply with the
essential requirements of the European Radio and Telecommu-
nication Terminal Directive 1999/5/CE.
This warning symbol indicates that this equipment
operates in non-harmonised frequency bands and/or may
be subject to licensing conditions in the country of use.
Be sure to check that you have the correct version of this radio
or the correct programming of this radio, to comply with your
national licensing requirements.
15 TCB-881
This unit can be used without license and charges in; Austria,
Belgium, Bulgaria,Cyprus, Czech, Denmark, Estonia, Finland,
France,Germanay, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland,Portugal,Pomania, Slovakia, Slovenia, Spain, Sweden,
Switzerland, and U.K.