TTI TCB-881 - Manual (Page 4)

Consider that this location of the transceiver should not
interfere with the driver and passengers. Choose a spot where
the microphone and all controls are easily accessible.
1) Put the mounting bracket on the proper location where you
are going to install.
2) Drill holes and fix mounting bracket on the location.
3) Connect the antenna cable plug to the standard receptacle
on the transceiver, which
is marked "ANT".
4) Connect the power cable directly to the vehicle battery or
fuse box of the car. Be careful to make sure of the polarity of
the battery first and connect the cable.(Red: Positive Pole(+),
Black: Negative Pole(-). The same colours are shown on the
battery and in the fuse box of the car.)
5) Connect the power cable to the transceiver cable.
6) Mount the microphone bracket on one side of the transceiver,
or near it using two screws included.
7) Connect the microphone to the transceiver’s microphone
receptacle. Now you are
ready to operate the
transceiver.
ENGLISH
4 TCB-881