Kiddy City'n move - Manual (Page 13)

EN
13
4.2 Width adjustment of the 5-point belt system and securing the child
Place your child in the seat unit, put the shoulder belts over childs shoulder and the
buckle between the legs. Push the buckle tongues into the buckle and ckeck if it is
closed.
The belt system can be adjusted by sliding the 5 belt adjusters in the desired direction
(fig. 14).
WARNING
The belt system is adjusted correctly when the belts
lay firmly on the childs body.
4.3 Height adjustment of the shoulder belts
Push the plastic clip on the backside of the backrest through the hole to the front
(fig. 15; no. 1).
Do the same on the second side.
Now insert the plastic clip into the hole at the required height (fig. 15; no. 2).
WARNING
The plastic clip must lay flat on the backside of the
backrest.
WARNING
Make sure that both shoulder belts are fixed at the
same height.
4.4 Opening / closing the bumper bar
To open the bumper bar, press the release button (fig. 26; no. 1) and open the bumper
bar (fig. 26; no. 2).
EN