Kiddy City'n move - Manual (Page 14)

EN
14
To close the bumper bar, push the releasing button into the guide on the chassis.
WARNING
Make sure that the bumper bar is always closed cor-
rectly at both sides when seat unit is in use. Never use
the seat unit without the bumper bar.
5. Using with infant carrier
5.1 Mounting the travel system adaptors on the chassis
WARNING
Unfold the stroller as described in section 3.1 and set
the parking brake.
Slide the travelsystem adaptor from inside on the metal profile above the seat
(fig. 16; no. 1). Position the travelsystem adaptor between the two position locators at
the lower side of the tube (fig. 16; no. 2).
Now fix the travelsytem adapter by closing the flap (fig. 17).
Do the same on the opposite side.
WARNING
Ensure both locking devices are engaged before use!
5.2 Mounting the infant carrier adaptors
Insert both adaptors into the channels on the travelsystem adaptors (fig. 18).