Kiddy City'n move - Manual (Page 16)

EN
16
5.4 Removing the infant carrier adaptors
Hold and push the removing button on the travelsystem adaptor (fig. 21, no. 1) and
pull out the infant carrier adaptor (fig. 21, no. 2).
Remove the second infant carrier adaptor in the same manner.
5.5 Removing the travelsystem adaptors
Push the opening button on the travelsystem adaptor upwards (fig. 22; no. 1) and
open the flap (fig. 22; no. 2). Afterwards detach the travelsystem adaptor from the
chassis (fig. 22; no. 3).
Remove the second adaptor in the same manner.
6. Removing and mounting the cover
6.1 Removing and mounting the belt system
Push the plastic clips on the end of the 5 belts from rear through the holes of the
backrest and seat (fig. 23).
Mount the belt system by pushing the clips through the holes and make sure that
they lay flat on the rear of the backrest and the seat.
WARNING
Never use the stroller without the belt system.
WARNING
Make sure that the belts are not twisted and placed into
the correct holes.