La Crosse Technology WS-9035U - Manual (Page 10)

10
XII. SETTING THE FORECAST SENSITIVITY
Note: The forecast sensitivity can be adjusted to allow for areas that have
a higher or lower sensitivity to changing air pressure (for example coastal
areas have more pressure change than areas such as southern Arizona).
The numbers correspond to the amount of air pressure change necessary to
trigger a change in the forecast icon. Areas that tend to have more air
pressure change would set the sensitivity to 3, while areas that experience
lower than normal air pressure change would set the sensitivity to 1.
1. Press and hold the SET button for 5 seconds.
2. “LCD” will show in the TIME LCD and the number setting will flash.
3. Press and release the SET button twelve times.
4. Either “1”, “2” or “3” will flash in the TIME LCD and the forecast
icon and tendency arrows will flash in the FORECAST LCD.
5. Press and release the ALM/+ button to select the forecast sensitivity
6. Press and release the SET button to confirm the forecast sensitivity
and complete the programming.
XIII.
SELECTING WIND MEASUREMENT UNIT (default is MPH)
1. Press the SET button
2. While pressing the SET button press and release the WIND/SNOOZE button to toggle between the wind
measurement units (m/s, mph, km/h, and knots)
FEATURES OF THE WS-9035U
Comfort Level
Indicator
Weather
Tendenc
y Arrow
WWVB Tower
Icon (indicates
time reception)
Satellite icon
(indicates
outdoor
transmission)
Radio-controlled
time icon
(indicates radio-
controlled time
turned on)
Forecast
icon
Current moon
phase display
Beaufort Scale
Wind Indicator