La Crosse Technology WS-9035U - Manual (Page 16)

16
difficult.
Moderately large
waves with blown
foam.
9
47-54
mph
75-88
kph
41-47
knots
Strong Gale
Slight damage occurs
to buildings, shingles
are blown off of roofs.
High waves (6 meters),
rolling seas, dense
foam, Blowing spray
reduces visibility.
10
55-63
mph
89-102
kph
48-55
knots
Whole Gale or Storm
Trees are broken or
uprooted, building
damage is
considerable.
Large waves (6-9
meters), overhanging
crests, sea becomes
white with foam, heavy
rolling, reduced
visibility.
11
64-72
mph
103-117
kph
56-63
knots
Violent Storm
Extensive widespread
damage.
Large waves (9-14
meters), white foam,
visibility further
reduced.
12
73+
mph
118+
kph
64+
knots
Hurricane
Extreme destruction,
devastation.
Large waves over 14
meters, air filled with
foam, sea white with
foam and driving spray,
little visibility.
IX. TIME ALARM
To set the time alarm:
1. Press and hold the ALM/+ button for 5 seconds.
2. The alarm time will begin to flash in the DATE LCD.
3. Press and release the IN/HR button to adjust the hour.
Note: When in the 12-hour mode and setting an alarm for a time between noon and midnight, “PM” will appear to
the left of the alarm time in the DATE LCD.
4. Press and release the OUT/MIN button to adjust the minutes.
5. Press and release the WIND/SNZ button to confirm the setting or wait for 20 seconds and the display will
automatically return to the normal mode.
To activate the alarm:
1. Press and release the ALM/+ button to toggle between the alarm
time and the day and date.
2. When the alarm time and alarm icon are showing in the DATE
LCD the alarm is activated.