La Crosse Technology WS-9625U-IT User Manual
Page 12
11
displayed on the Weather Station. Also, the signal reception icon will be displayed. If this
does not happen after 2 minutes, the batteries will need to be removed from both units and
reset from step 1.
5.
Insert the batteries to the second sensor as soon as the outdoor temperature readings from
the first sensor are displayed on the Weather Station.
Note: User shall insert the batteries into the second sensor within 30 seconds of reception of the
first .
6.
The outdoor temperature and humidity from the second sensor and the "channel 2" icon
should then be displayed on the Weather Station. If this does not happen after 2 minute,
the batteries will need to be removed from all the units and reset from step 1.
7.
Insert the batteries to the third sensor as soon as the "channel 2" icon and outdoor data are
displayed on the Weather Station. Then within 2 minutes, the channel 3 outdoor data from
the third sensor will be displayed and the channel icon will shift back to "1" once the third