Note – La Crosse Technology WS-9625U-IT User Manual
Page 14
13
IMPORTANT:
Transmission problems will arise if the setting for additional sensors is not followed as described
above. Should transmission problems occur, it is necessary to remove the batteries from all units
and start again the set-up from step 1.
9.
Once the remote temperature has been received and displayed on the Weather Station, the
Atomic time (WWVB time) code reception is automatically started. This takes typically
between 3-5 minutes in good conditions.
Note:
•
If after 10 minutes, the Atomic Time (WWVB) time has not been received, press the SET
key to manually enter a time initially.
•
Daily WWVB reception (Atomic time) is attempted at full hour between 12:00 am to 6:00
am. If the reception is successful, there will no reception attempt until the following day.
When this is successful, the received time will override the manually set time. The date is