Datamax M-Class Mark II M-4206 - Manual (Page 22)

16 M-4206
4.0 Introduction
The Front Panel consists of three indicator lights and three function
buttons. The functions of these lights and controls are listed in the
following sections.
4.1 Lights
Normal Mode
(Normal power-up)
STOP
Solid On: Indicates the printer is in the ‘Paused’ state
Flashing: (When using the Peel & Present Option) Indicates
a label is presented to the operator.
Indicates a top of form or mechanical error has occurred
Solid On: Indicates the printer is on and ready for printing
Flashing: Indicates the printer is receiving data from the host
ERROR
READY
¾ Both the READY and STOP Lights will be on during power-up initialization and a warm reset.