Datamax M-Class Mark II M-4206 - Manual (Page 23)

M-4206 17
4.2 Buttons
The three buttons, PAUSE , FEED , and CANCEL perform different functions based on the printer’s
operational mode. The printer operates in one of the following modes:
Normal: Normal printer functions. See Section 4.3.
Express Setup: Allows quick access to the most common printer settings, (Sensor Type, Media Type, and Option Control. See
Section 4.4.
Printer Setup: Allows changes to the printer’s operational settings. See Section 4.5.
Calibration: Allows the ‘calibration’ of the media being used for the correct sensing of the top of form. See Section 4.7.
4.3 Normal Mode - Button Functions
In ‘Normal’ mode, the printer’s buttons control normal operations such as pause, feed, and cancel, as well as the test and
reset functions by using button combinations as detailed below.
Pauses/Un-pauses the printer
Feeds one label. Clears fault conditions
Cancels the current batch of labels. Press the Pause button to
print the next batch of labels in the printer’s buffer
Normal Mode
(Normal power-up)
CANCEL
PAUSE
FEED
Press and Hold to perform “Label Alignment”, see section 4.6
Button Combinations (push buttons simultaneously)
PAUSE
+
FEED
Prints the Test Label, see Section 4.8.2.
PAUSE
+
CANCEL
Performs a warm reset and returns to the Normal Mode of operation.
FEED
+
CANCEL
Produces Database Configuration and Dot Check Labels, see Section 4.8.1