LD Systems XS 700 - Manual (Page 2)

Introduction
With the largest model measuring just 1U and weighting just 3.4, the LD Systems XS power amplifiers are
absolute flyweights. Our Class D power amplifier technology makes it possible to pack high performance into a
minimum of space without generating unnecessary loss energy. The power amplifiers have outputs of 100W to
350W per channel at 4 ohms and 200w to 700W in bridged mode. It is conceived for all professional applications
in which ease of transport and space is essential, whether mobile or in permanent installations.
The XS power amplifiers are equipped with all protection circuits against short-circuiting, DC, overheating, and
overloading and have a soft-start delay.
All inputs have XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as
outputs. On the rear panel, it is possible to select the mode of operation and gain and activate the limiter and
ground-lift function. LEDs on the front indicate power, signal, clipping, triggering of the protection circuit, and the
mode of operation. The XS power amplifiers impress with operational dependability and a transmission range of
20Hz – 20kHz, which is reproduced transparently and dynamically with high impulse fidelity.
2
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ES
pA
ño
L
po
LSKI
IT
ALIAN
o
You‘ve made the right choice!
We have designed this product to operate reliably over many years. LD Systems stands for this with its name and
many years of experience as a manufacturer of high-quality audio products.
Please read this User‘s Manual carefully, so that you can begin making optimum use of your LD Systems product
quickly.
You can find more information about LD SYSTEMS at our Internet site WWW. LD-SYSTEMS.COM