Returning to a pre-marked position – Canon XLH1 User Manual
Page 102
102
Returning to a Pre-marked Position
If you wish to return to a particular scene later, mark the point with the zero set memory, and the tape will
stop at that point when you rewind/fast forward the tape.
This function is operated with the wireless controller.
1. Press the ZERO SET MEMORY button at the point you wish to return to later.
• The tape counter is reset to 0:00:00 and the
mark appears.
• To cancel, press the ZERO SET MEMORY button again.
2. After you finish playing back the tape, rewind the tape.
• “
RTN” appears.
• The tape stops automatically at “0:00:00” and the
mark disappears.
• The tape counter changes to time code.
The zero set memory may not function correctly if the time code has not been recorded
consecutively.
The zero set memory function may not work correctly if you mix recordings in HDV and DV
standards on the same tape.
REW
button
ZERO SET MEMORY
button
STOP
button