Canon XLH1 - Manual (Page 11)

11
Intr
oduction
E
* Do not use tripods with fastening screws longer than 5.5 mm as it may damage the camcorder.
About the Terminal
(LANC) stands for Local Application Control Bus System. The terminal allows you to connect and control
connected devices.
Connect only devices with the
mark to the terminal.
Operation cannot be guaranteed for connections with devices not bearing the mark.
Some buttons of connected devices may not operate or may operate differently than the buttons on the camcorder.
Front view
Back view
Tally lamp ( 93)
Remote sensor ( 26, 106)
Grip belt ( 21)
Attachment sockets for the optional TA-100 Tripod
Adapter ( 147)
Tripod socket*
Viewfinder cable (
17)
Remote sensor ( 26, 106)
Start/stop button ( 40)
Microphone locking screw ( 20)
Strap mount ( 21)
XLR input terminals ( 61, 62)
SHUTTER buttons ( 68)
PHONES LEVEL dial
(phones) terminal
HDV indicator ( 45)
HDV/DV IN/OUT terminal ( 98, 107, 110)
terminal
LINE/MIC switch ( 61, 62)
+48V switch ( 61, 62)
MIC ATT. switch ( 60, 62)
TAPE/CARD switch ( 113)
CARD access indicator ( 113)
ZOOM SPEED switch ( 48)
ZOOM SPEED dial ( 48)
Start/stop button ( 40)
COMPONENT OUT terminal ( 97)