Louroe Electronics DCS-1 User Manual
Dcs-1
DESCRIPTION
The Model DCS-1 is a duress call station with a built-in panic button, 3kH oscillator and electret
condenser microphone. They are mounted to a stainless steel faceplate that fits into a single gang
electrical box (not supplied). As part of an audio duress system, Model DCS-1 can activate the
Louroe Base Station when the panic button is pressed, or by sound activation picked up by the
microphone. Unit is compatible only with Louroe Models DG-12II and DG-25III Alarming Base
Stations. When the alarming base station is activated, personnel can monitor the immediate area
around the DCS-1 location.
2 Conductor shielded cable, 22
gauge with a 24 gauge drain wire
NOTE:
Unshielded cable is not
satisfactory for audio systems
WIRING REQUIREMENTS
West Penn 452 or equivalent
DCS-1
REMOTE CALL STATION
INSTALLATION AND OPERATING INSTRUCTIONS
DCS-1
REMOTE CALL STATION
6955 VALJEAN AVE, VAN NUYS, CA 91406
PH: (818)994-6498 / FAX: (818)994-6458
/ www.louroe.com
®
Page 1 of 4
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406
TEL (818) 994-6498
FAX
994-6458
website: www.louroe.com e-mail: [email protected]
(818)
®
dcs-1_inst_3/15