LSC Lighting iSeries User Manual
Page 20
V1.21 September 2007
iPAK/iPRO Dimmer Operator Manual
LSC Lighting Systems (Aust) Pty Ltd
16
6.0 COMPLIANCE
STATEMENTS
6.1
Year 2000 Compliance Statement
Following is a definition of Year 2000 Conformity Requirements as defined by the British
Standard DISC PD2000-1. “Year 2000 Conformity shall mean that neither performance nor
functionality is affected by dates prior to, during, or after the Year 2000. In particular:
Rule 1
No value for current date will cause any interruption in operation.
Rule 2
Date-based functionality must behave consistently for dates prior to, during and
after the Year 2000.
Rule 3
In all interfaces and data storage, the century in any date must be specified either
explicitly or by unambiguous algorithms or inferencing rules.
Rule 4
Year 2000 must be recognised as a Leap Year.”
The iPRO dimmers have been tested and found to comply with the above definitions.
6.2
CE Compliance Statement
The iPAK and iPRO range of dimmers from LSC Lighting Systems (Aust) Pty. Ltd. have been
designed and tested to the European Committee for Electrotechnical Standardization
(CENELEC) standard for professional entertainment dimmers – EN55015 (Lighting).
6.3
C Tick Compliance Statement
Current Australian Communication Authority regulations do not require C Tick compliance for
three phase apparatus, however compliance with the European CE Norms generally far exceeds
that required for C Tick certification. To this end LSC has based its compliance on the CE Norms.
6.4 Disclaimer
LSC Lighting Systems (Aust) Pty. Ltd. has a corporate policy of continuous improvement,
covering areas such as product design and documentation. In light of this policy, some detail
contained in this manual may not match the exact operation of your product.
In any event, LSC Lighting Systems (Aust) Pty. Ltd. can not be held liable for any direct, indirect,
special, incidental, or consequential damages or loss whatsoever (including, without limitation,
damages for loss of profits, business interruption, or other pecuniary loss) arising out the use or
the inability to use this product for its intended purpose as expressed by the manufacturer and in
conjunction with this operating manual.
Servicing of this product is recommended to be carried out by LSC Lighting Systems (Aust) Pty.
Ltd. or its authorised service agents. No liability will be accepted whatsoever for any loss or
damage caused by service, maintenance or repair by unauthorised personnel. In addition
servicing by unauthorised personnel may void your warranty.
LSC Lighting Systems (Aust) Pty Ltd supplies the enclosed information in good faith. LSC Lighting Systems (Aust) Pty Ltd makes no
representations or warranties with respect to the contents or use of this manual and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose. Our policy is one of continual improvement and we reserve the right to
change circuitry, specifications or mode of operation of circuitry without obligation to notify any person or entity of such revisions
or changes.