Lumens Technology VS-K20 - Manual (Page 4)

English - 3
Chapter 1 Safety Instructions
Always follow these safety instructions when setting up and using the Camera
Controller:
1. Use attachments only as recommended.
2. Use the type of power source indicated on the Camera Controller. If you are
not sure of the type of power available, consult your distributor or local
electricity company for advice.
3. Always take the following precautions when handling the plug. Failure to do
so may result in sparks or fire.

Ensure the plug is free of dust before inserting it into a socket.
 Ensure that the plug is inserted into the socket securely.
4. Do not overload wall sockets, extensions leads or multi-way plug boards as
this may cause fire or electric shock.
5. Do not place the Camera Controller where the cord can be stepped on as
this may result in fraying or damage to the lead or the plug.
6. Never allow liquid of any kind to spill into the Camera Controller.
7. Except as specifically instructed in this User Manual, do not attempt to
operate this product by yourself. Opening or removing covers may expose
you to dangerous voltages and other hazards. Refer all servicing to licensed
service personnel.
8. Unplug the Camera Controller during thunderstorms or if it is not going to be
used for an extended period. Do not place the Camera Controller or remote
control on top of vibrating equipment or heated objects such as a car, etc.
9. Unplug the Camera Controller from the wall outlet and refer servicing to
licensed service personnel when the following situations happen:

If the power cable or plug becomes damaged or frayed.
 If the Camera Controller is wet with liquid, rain or water.
<Note> Using an incorrect battery type in the remote control may result in
breakdown. Follow local instructions on how to dispose of used batteries.