Luxi Electronics DIY-28DS10 - Manual (Page 3)

Website:
www.luxielectronics.com
Email: [email protected]
Phone: +1 (949) 654-2047
Address: Irvine, CA, USA
HD DIY user manual regular wires Revision: 2.00 Date: 1/26/2015
US patents: 8002572, 8500489 issued; additional patents issued or pending in multiple countries
Step 1, wire preparations
1.1 Use a blade to cut around a circle of the
HDMI cable overall jacket about 4 cm (1-1/2”)
from the end
1.2 Use the blade to slice along the cable
overall jacket then peel off the overall jacket
1.3 Fold back the braids
1.4 Remove the overall aluminum foil; now the
19 wires inside the HDMI cable are exposed
1.5 There are 4 twisted pairs. Cut off the plastic
wrap on each pair ¼” (6 mm) from the end
1.6 Cut off the aluminum foil from the very end