MacroSystem Motion 3D Pack 1 and 2 - Manual

Motion 3D Pack 1 and 2
- 1 -
© MacroSystem Digital Video AG
Motion 3D Pack 1 and 2
1. Introduction
Motion 3D Pack 1 and Motion 3D Pack 2 are collections of effects consisting of five
transitional effects each. Motion 3D Pack 1 consists of the effects M3D1 to M3D5 and
Motion 3D Pack 2 consists of M3D6 to M3DX.
Both packages consist of differing motion paths, which are similar in their approach.
Thus, the descriptions of both packages are summarized in the following text.
All effects are based on cross-fading from one scene to another via movements in three-
dimensional space.
M3D1 / M3D6 Plain
One scene moves in front of another and, in the process, is visible on both sides. A
colored border is added to the depiction at the sides.
M3D2 / M3D7 Double
This effect is like ÒM3D1 PlainÓ, except that both scenes move in front of a selectable
background.
M3D3 / M3D8 Two-Sided
In this effect, a surface moves in front of a selectable background. The front side of the
surface shows one scene, the backside of the surface shows the other scene. There is
no border.
M3D4 / M3D9 Split
In this effect, the two scenes are split and cross-faded in a more complex manner.
M3D5 / M3DX Two-Sided Thick
This effect is like ÒM3D3 Two-SidedÓ, but with a colored border.
2. M 3D Bonus
This bonus effect is installed together with Motion 3D Pack 2. It combines the paths of
Motion 3D Pack 1 with the ones of Motion 3D Pack 2.
If you have not installed Pack 1, only the paths of Motion 3D Pack 2 will be available.