Marantz CD6005 - Manual (Page 21)

21
Appendix Tips Settings Playback Contents
Front panel Display Rear panel Index Remote
Connections
Remote control connection
When you use this unit connected to a Marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly.
Connection
Use the supplied remote connector cable to connect the REMOTE
CONTROL IN connector of this unit to REMOTE CONTROL OUT connector
of the amplifier.
Setting
Turn the EXTERNAL/INTERNAL switch on the unit to “EXTERNAL”.
• This setting will disable remote sensor reception of this unit.
• To operate the unit, point the remote control at the remote sensor of
the amplifier.
%
• To use this unit by itself without connecting an amplifier, turn the switch to
“INTERNAL”.
Signal flow
Amplifier
Remote
connector cable
(supplied)
Set to “EXTERNAL”.
This unit