Marantz CD6005 - Manual (Page 56)

56
Tips Settings Playback Connections Contents
Front panel Display Rear panel Index Remote
Appendix
%
• Only music files that are not copyright-protected can be played on this set.
• Contents downloaded from pay sites on the Internet may be copyright
protected. Also, files encoded in WMA format when ripped from a CD, etc., on
a computer may be copyright protected, depending on the computer’s settings.
• When audio from files in the USB memory device is output from the digital
audio output connector, the sampling frequency is converted to 44.1kHz for
output.
NOTE
• Insert and remove a USB memory device with the power set to standby. If it is
inserted or removed with the power on, the recorded files cannot be loaded or
may be damaged.
• It is not compatible with an MP3 player, digital camera, a USB device for a mobile
phone, etc.
• The unit cannot charge a USB device.
• The unit does not support a card reader, USB extension cable, or USB hub.
Playback order of MP3/WMA/AAC/WAV
files
When there are multiple folders containing MP3/WMA/AAC/WAV files,
the playback order of folders is automatically set when this unit reads the
media. The files in each folder are played back in the order in which the
files were recorded on the media, from the oldest date and time.
CD-R/CD-RW
For playback of files on CD-R or CD-RW , files in all folders on the first layer
are played first, next on the second layer, then next on the third layer, and
so on in this order.
USB memory device
For playback of files recorded on USB, files in the first folder on the first
layer are played first, next folders on the second layer in the folder, then
next on the third layer, and so on in this order. Then accordingly files on
another first layer are played.
%
• The playback order displayed on a PC may differ from the actual playback order.
• The playback order with a CD-R/CD-RW may differ, depending on the writing
software.
NOTE
• The playback order may differ from the order in which the folders or files were
recorded if you delete or add a folder or file on USB. This occurs because of data
recording specifications and is not a malfunction.