0 flat panel installation, 0 lateral shift adjustment – Marantz WB4001T User Manual

Page 11

Advertising
background image

- 11 -

8.0 FLAT PANEL INSTALLATION

Step 15

WARNING: AT LEAST (2) QUALIFIED PERSONNEL ARE STRONGLY RECOMMENDED FOR

INSTALLATION OF THIS PRODUCT. FAILURE TO DO SO COULD RESULT IN

SERIOUS INJURY AND POSSIBLE DAMAGE TO THE FLAT PANEL

Raise the flat panel with the mounting brackets secured to the flat panel and insert the top and
bottom hooks from each bracket to the rods from the wall plates (Figure 15).

Figure 15

9.0 LATERAL SHIFT ADJUSTMENT

Step 16

Make any lateral shift adjustment and lock it by tightening the two (2) M6 x 30 (mm) Phillips screws
found on the bottom of the mounting brackets.

CAUTION: Do not over tighten the M6 screws to the rods (Figure 16).

Figure 16

TOP

BOTTOM

Lateral shift

Wall plate

Advertising