Marantz WB4001T - Manual (Page 5)

- 5 -
2.0 FINDING THE CENTER OF THE DISPLAY
WARNING: PROPER INSTALLATION PROCEDURE BY QUALIFIED PERSONNEL AS
OUTLINED IN THE INSTALLATION INSTRUCTIONS MUST BE ADHERED TO.
FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND
POSSIBLE DAMAGE TO THE FLAT PANEL.
WARNING: INVERT THE FLAT PANEL, PLACE IT ON A SOFT, FLAT SUFRACE TO
PREVENT DAMAGE TO THE FLAT PANEL. USE A BLANKET, FOAM, ETC.
FAILURE TO DO SO WILL RESULT IN DAMAGING THE FLAT PANEL. DO NOT
LAY THE FLAT PANEL ON THE FLOOR WITHOUT ANY PROTECTION TO THE
GLASS. THE FLAT PANEL IS HEAVY AND FRAGILE. AT LEAST (2) QUALIFIED
PERSONNEL ARE STRONGLY RECOMMENDED FOR INSTALLATION OF THIS
PRODUCT. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY AND
POSSIBLE DAMAGE TO THE FLAT PANEL.
Step 1 Step 2
Once the flat panel is inverted, use a measuring
tape to find the center of your flat panel
measuring from outside to outside of the
chassis (Figure 1). Using a pencil lightly mark the center of your flat
panel (Figure 2)
.
CL
L
C
Figure 1 Figure 2
Inverted flat panel
Top of flat
panel
Bottom of flat
panel
Mark the center of
the flat panel
Measuring
tape
Inverted flat panel