Safety instructions, Danger, Caution – MBM Corporation MBM 25 User Manual

Page 2

Advertising
background image

SAFETY INSTRUCTIONS

Definition of Symbols and Notes
In this manual following names and signs stand for possible dangers.

Danger

This symbol stands for immediate danger threatening the life and health of
persons. Disregarding these instructions may cause severe damage to health
and even serious injuries.

Caution

This symbol stands for an endangering situation that may occur.
Disregarding these instructions may lead to slight injuries or damage to
property.


Explanations of the illustrations used in the Safety Instructions are given as follows:

Danger

1. Don't put a hand under the hollow drill bit. There is a danger of receiving an injury.
2. Don't touch any rotating part. There is a danger of receiving an injury.
3. Don't bring a hand, face, hair, sleeves of clothes and the like close to the rotating parts of

the machine. There is a danger of receiving an injury.

4. When you change into unusual states, like smoke comes out, please turn off the power

switch of a main part, and pull out a power supply plug from a wall socket after that.
There are failure, a fire, and fear of an electric shock.

Caution

1. Please do not install a machine in the unstable place to which it is shaky or leans. There

is a danger of receiving an injury.

2. When you move, have a base. There is a danger of receiving an injury.
3. When you install a machine, please install to a place with no dust, and the place which is

not influenced with a liquid. It becomes the cause of failure if the installation method is
mistaken.

4. Turn off the power supply beforehand when attaching or detaching hollow drill bits.

There is a danger of receiving an injury.

5. Don't touch the blade point of the hollow drill bit. There is a danger of receiving an

injury.

6. The hollow drill bits become heated when they are drilling. Don't touch them when they

are drilling. Touching them may cause a burn.

7. Please do not make a hole in paper with foreign substances, such as a needle of a

stapling machine. Moreover, also things other than paper. There is a danger of receiving
an injury.

8. Please do not make a hole hard paper and near the hole which have opened in piles.

There is a danger of receiving an injury.

9. Turn off the power supply beforehand when adjusting the fiber plug. There is a danger of

receiving an injury.

10. When a machine stopped during use, turn off the power switch, and pull out a power

supply plug from a wall socket after that. There is a danger of begins to turn again. And
there is a danger of receiving an injury.

Advertising