MBM Corporation LEOWORK PAPER LIFT User Manual

Page 7

Advertising
background image

- 7 -

A

D Überlastschutz Temperatur:

Blinkt die Anzeige im Bedienfeld (A)

abwechselnd grün/gelb, dann ist die

maximale Einschaltdauer der Hub-

säule nahezu erreicht. Der Huban-

trieb ist noch ca. 1 Minute funktions-

fähig.

Wenn der Motor überhitzt ist, blinkt

die Anzeige je nach Ladezustand

gelb/rot oder grün/rot. Die Säule

kann nun nicht mehr aktiviert werden.

Nach einer Wartezeit von ca.

8 Minuten ist der Hubantrieb wieder

funktionsfähig.

GB Thermo overload protection:

If the control buttons on the battery

charging display (A) blink alternately

green/yellow, the maximum operation

time of the lift drive is almost reached.

From now on the lift drive works for

approx. 1 more minute.

When the motor is overheated, the

control buttons on the battery

charging display (A) blink yellow/red

or green/red depending on the state

of charge. Now the lift drive will not

operate. After approx. 8 minutes the

lift drive can be activated again.

F

Protection thermique du moteur :

Si les voyants vert et jaune du

panneau de commande (A) s´allument

en alternance, cela signifie que le

temps maximal d’utilisation de la

colonne est presque atteint. La

montée/descente de la table

fonctionnera encore 1 minute environ.

Lorsque le moteur est en surcharge,

les voyants (A) clignotent, selon l´état

de chargement, jaune/rouge ou vert/

rouge. En conséquence, la colonne ne

peut plus être activée. Il faut attendre

environ 8 minutes, avant de pouvoir

l’utiliser à nouveau.

Bedienung

Operation

Utilisation

Advertising