MBM Corporation Spine Pro Bookletmaker - Manual (Page 4)

Spine Pro Operator Manual
T10132
Always connect the equipment to a properly
grounded power source receptacle. In doubt,
have the receptacle checked by a qualified
electrician.
WARNING: Improper connection of the
equipment grounding conductor can result in
electrical shock.
Always follow all warnings marked on, or
supplied with, the equipment.
Always locate the equipment on a solid
support surface with adequate strength for
the weight of the machine.
Always exercise care in moving or relocat-
ing the equipment.
Always keep magnets and all devices with
strong magnetic fields away from the ma-
chine.
Never use a ground adapter plug to connect
the equipment to a power source receptacle
that lacks a ground connection terminal.
Never attempt any maintenance function that
is not specifically described in this documen-
tation.
Never remove the covers or guards that are
fastened with screws.
Never install the unit near a radiator or any
other heat source.
Never override or “cheat” electrical or me-
chanical interlock devices.
Never operate the equipment if you notice
unusual noises or odors. Disconnect the
power cord from the power source recepta-
cle and call your customer service engineer
to correct the problem.
Attention to the following notes ensures the continued safe operation of your equipment.
1.1 Operational safety
1. Introduction
1-1