MBM Corporation TRIUMPH 6660 - Manual (Page 27)

- 27 -
• Blade and cutting stick replacement •
If the cutting quality decreases:
• Check the cutting depth (see page 35).
• Check the cutting stick (see page 31).
• Replace or grind the blade (see page
27 - 35).
The blade cannot be ground if the blade
height is less than 83 mm/3,29 inches.
A new blade must be used.
The blade may only be ground by a qualified
supplier or from the manufacturer
Krug & Priester, D-72336 Balingen.
Danger! Risk of injury!
The blade is extremely sharp. Do not
extract or transport the blade without
protection. Changing the blade may only be
performed by trained staff.