Ba a – MBM Corporation TRIUMPH 5551-06 EP (99 STEP MODULE) User Manual
Page 15
Advertising
- 15 -
B
A
A
B
GB •
Bedienung
• Operation •
Setting clamping pressure
If necessary, set clamping pressure with
setting wheel (
A). If a cutting process has
been activated, the oil pressure can be seen
on the oil pressure indicator (
B).
The clamp moves automatically when cutting
is activated. The paper can be pressed in
advance, with the foot pedal (
A). Cutting is
activated by pressing both buttons (
B) on the
front table.
Advertising
This manual is related to the following products: