MBM Corporation TRIUMPH 5551-06 EP (99 STEP MODULE) - Manual (Page 39)

- 39 -
B
A
• Oil pressure set too low. Increase oil
pressure at rotary control (
A).
• Hydraulic oil shortage. Check hydraulic
oil level (
B), if necessary, top up.
Cut cannot be made.
• Measurement has not been reached
correctly. LED "
S" does not turn off.
Push the S button again.
"CUT" appears on the display,
• the clamp is not in upper position.
Operate the foot pedal (clamping) again.
GB • Mögliche Störungen
• Possible malfuntions •