Transport operation, Programming for crease mode – MBM Corporation iCREASE EXCEL User Manual
Page 10
TRANSPORT OPERATION
The Run Button will start the Transport in any given mode. Press it
again to stop the transport. Each Mode has a timeout feature to
preserve the life of the machine.
A document may be slowly advanced through the transport by
pushing and holding one of these buttons.
EXAMPLE:
The motor should advance transport at slow speed and stop
whenever finger is lifted.
Controls on-off function of motor.
EXAMPLE:
Machine will run at mode and speed previously selected.
Machine will stop.
PROGRAMMING FOR CREASE MODE
Half Fold: Press the Crease Mode Button > Half > Start Measuring > Physically Run a
sheet through the machine for the sensor to measure > Accept > Run.
EXAMPLE:
7