MBM Corporation iCREASE EXCEL - Manual (Page 14)

Saving Custom Crease Jobs: Press the Crease Mode Button > Custom > Enter In
Distance For each Crease in mm > Save > Select Position to save in 1, 2, 3, or 4.
Recalling Custom Crease Jobs: Press the Crease Mode Button > Custom > Recall >
Accept > Run.
Micro Adjusting the Crease Position: Press the adjust button from the run screen.
You can micro adjust each crease by pressing the arrow keys each direction. Each press
will adjust by 1/13th of a mm. Each Adjustment is relative to the one before it so if you
adjust crease 1 by 3 clicks it will also move all the creases after it. You would then need
to adjust them back 3 clicks each.
11