MBM Corporation 87M - Manual (Page 5)

Make sure that the combined power consumption of the appliances to be connected does not
exceed the capacity rating of the power outlets or plug receptacles. Exceeding the capacity
rating could cause the power outlets, plug receptacles, or power extension cords to overheat
Remove any dust that accumulates on the power plug prongs and the surface of the plug from
If any foreign object such as metal or liquid should enter this unit, immediately turn the unit
off at the power switch and disconnect the power plug from the power outlet. Failure to do
Do not damage the power cord or power plug. (Do not scratch, alter, bend, twist, pull or place
Always grip the plug when disconnecting the power plug from the power outlet. Forcibly
Before cleaning this unit, turn the unit off at the power switch and disconnect the power plug
from the power outlet. Accidental operation of the unit during cleaning could result in injury.
CAUTION: !
Always disconnect the power plug from the power outlet when the unit is not to be used for
insulation should deteriorate.
Install this unit on a level, stable stand or floor, with sufficient space around it. Failure to do
so could result in the unit overturning and causing injury.
Do not install this unit in a location where there is excessive humidity or where contact with
Disconnect the power plug from the power outlet before attempting to move this unit. Failure
Do not touch the power switch with wet hands. Otherwise electric hazards may occur.
SAFETY PRECAUTIONS
(continued)
Keep away long hair, ties, jewelry and loose clothing. This could result in injury.
Do not use flammable sprays inside or near the unit (e.g. when cleaning the unit). Such
Do not use solvent inside or near the unit (e.g. when cleaning the unit). Such solvents may
damage the rubber rollers and resin inside the unit, resulting in malfunctions.