MBM Corporation 206M User Manual
Page 12
11
Under the following conditions the machine will automatically stop feeding:
(Press the CLEAR/RESET key to reset after the error has been corrected)
Conditions
Indication on Control panel
When the START/STOP key is pressed while there is no stock.
When the START/STOP key is pressed while the paper feed
lever is in the upper position.
When the stock runs short while folding in the Batch Counting Mode.
When a paper mis-feed occurs.
When paper jam occurs at Table 1 and Table 2.
When paper stack (exit) table is full.
When paper jam occurs at the paper exit.
Clearing a Paper Jam:
Should a paper jam occur, set the POWER to the OFF position and remove the jammed sheet(s). When the
jammed paper is wrapped around the fold roller or other parts, it can be easily removed by detaching Tables
1 and 2 from the unit.
Note:
When the roller cover is opened, the machine will automatically stop operation.