MEGA Corp. MES34-OPS-1 - Manual (Page 30)

MES34-OPS-1
21 Feb 2014
SECTION 6
Appendix
6-7
MES34-OPS(CL)-1
21 Feb 2014
14. Drive the machine forward in order to have the
best visibility and the best control.
15. While you operate the machine slowly in an open
area, check for proper operation of all controls
and all protective devices.
When you operate the machine in very rough
ground conditions or at travel speeds not
suitable for the ground conditions, this may
result in excessive seat vertical travel with impact
of the suspension against the travel stops, which
may cause injury. Do not operate the machine on
ground conditions and at travel speeds that
could result in the seat suspension travel stops
being contacted. In order to minimize impact
loading on the operator, properly adjust the seat
controls based upon your weight and based
upon your height. Refer to the 631G Operation
and Maintenance Manual, "Seat" for more
information.
There is restricted visibility to the area directly
behind the machine. Failure to make sure the
area is clear could result in injury or death. Use a
second person on the ground to make sure that
N-6