Dbk45 – specifications – Measurement Computing DBK Part 2 User Manual

Page 76

Advertising
background image

DBK45, pg. 6

987696

DBK Option Cards and Modules

DBK45 – Specifications

Name/Function: Simultaneous Sample and Hold and

Low-Pass Filter Card

Number of Channels: 4
Input Connections: 4 BNC connectors; 4 screw-terminal sets
Output Connector: DB37 male,

mates with P1 using CA-37-x cable

Number of Cards Addressable: 64
Dimensions: 8.25” × 3.25”
Input Type: Differential
Voltage Input Ranges:

0 to ±5000 mVDC

0 to ±500 mVDC

0 to ±50 mVDC

0 to ±25 mVDC

0 to ±10 mVDC

For Custom Gains: R

GAIN

= [40,000/(Gain-1)] - 80 Ω

Input Amplifier Slew Rate: 12 V/µs minimum
Acquisition Time:

0.6 µs (10 V excursion to 0.1%)

0.7 µs (10 V excursion to 0.01%)

Channel-to-Channel Aperture Uncertainty: 50 ns
Output Droop Rate: 0.1 µV/µs
Input Gains: ×1, ×10, ×100, ×200, x500, and

user-set up to ×500

Input Offset Voltage: 500 µV + 5000/G maximum (nullable)
Input Offset Drift: ±5 + 100/G µV/°C maximum
Input Bias Current: 100 pA maximum
Input Offset Currents: 50 pA maximum
Input Impedance: 5 × 10

12

Ω parallel with 6 pF

Switchable Bias Resistors: 100 KΩ each to analog common

Gain Errors:

0.04% @ ×1

0.1% @ ×10

0.2% @ ×100

0.4% @ ×200

1.0% @ ×500

Temperature vs Gain:

±20 ppm/°C @ ×1

±20 ppm/°C @ ×10

±40 ppm/°C @ ×100

±60 ppm/°C @ ×200

±100 ppm/°C @ ×500

Non-Linearity:

±0.015 % full-scale @ ×1

±0.015 % full-scale @ ×10

±0.025 % full-scale @ ×100

±0.025 % full-scale @ ×200

±0.045 % full-scale @ ×500

Common-Mode Rejection:

70 dB minimum @ ×1

87 dB minimum @ ×10

100 dB minimum @ ×100

100 dB minimum @ ×200

100 dB minimum @ ×500

Active Filter Device: UAF42 (Burr-Brown)
Number of Poles/Filter: 3
Types of Filters: Bessel, Butterworth,

Chebyshev

Frequency Range: 0.1 Hz to 50 kHz

The frequency is set by installation of

4-6 resistors and/or capacitors in

provided socket locations.

Frequency Modules: Optional frequency

module kits are available that consist of

4 plug-in resistor/capacitor (RC)

headers. These RC headers are pre-

configured for any of the following

frequencies: 5 Hz, 10 Hz, 100 Hz,

500 Hz, or 1 kHz—all are Butterworth-

type filters.

Advertising
This manual is related to the following products: