Measurement Computing DBK70 - Manual (Page 19)

DBK70 User’s Manual 919092 Hardware Reference 4-1
Hardware Reference 4
DBK70 Connectors …… 4-1
Serial Configuration Port …… 4-1
Network Port …… 4-2
Direct Parameter Analog Output Ports 1 and 2 …… 4-3
P1 Multiplexed Output Port …… 4-3
Auxiliary Power Connectors …… 4-4
Power Issues …… 4-4
LED Operation …… 4-4
Vehicle Diagnostic Connectors …… 4-5
Serial Port Cable, CA-212 RS-232 [Included] …… 4-6
Vehicle Network Cable, CA-210 [Included] …… 4-6
J1939/J1708
9-pin Deutsch Connector , Vehicle Network Cable, CA-218 [Optional]…… 4-7 **
Analog Output Cable, CA-208 [Optional] …… 4-8
Chassis Label …… 4-9
Card Installation …… 4-10
Network Interface Cards …… 4-10
Analog Output Cards …… 4-11
DBK70 Connectors
Serial Configuration Port
The Serial Configuration Port is used to configure the DBK70 using a PC and the included PC software.
Connect this port to the PC’s COM port using the included CA-212 cable.
Pin# Name
1 NC
2
Tx
3 Rx
4 NC
5 Analog Gnd
6 NC
7 CTS
8 RTS
9 NC
**
Note: J1708 is no longer supported by DBK70 software.