Measurement Computing eZ-TOMAS rev.11.0 - Manual (Page 32)

Input Channels Tab
This tab is used to configure each channel for your project. The available setup options in this window are
dependent on the instrument type selected.
Input Channels Tab, Showing the Leftmost Column
To configure a channel:
1. Select the channel to be configured.
2. Set the instrument type.
3. Set the value for each attribute of the channel.
Repeat this process for each channel.
The parameters of one channel can be copied to another channel by using
options on the Edit menu.
Medallion Users Only: Configure the Dip Switches for each probe, according to probe
type. For details refer to the Medallion user’s manual (p/n 1086-0901).
Input Channels Tab Column Functions
No. is the channel number. Selecting the channel number highlights all attributes for that
channel.
Type is the type of instrument attached to the channel. Options are:
o Accelerometer
o Velocity
o Displacement
o Static
o Tach
o Microphone
o Pressure
o General
o Unused (select “Unused” for channels that
have no instrument attached.)
Name is a Label you will use to identify the channel.
Gauge Min,
Gauge Max represent the instrument range minimum and maximum gauge values.
Units is the Engineering Units you want to use. Options depend on the instrument type.
4-4 Edit Menu 947394 eZ-TOMAS