MEGAPOWER MVP-886 - Manual (Page 22)

- 18 -
6.10 MODE
Save current mode for future usage which is much helpful.
Parameters include “ MONOCHROME ”, “NEGATIVE”, “MIRROR”,
“TEXT”,”AUTO EXPOSURE”,”AUTO WHITE BALANCE”, Z oom
ratio and focus distance. There are 11 storage modes provided. It
will be in MODE “default” in later operation.
Example: Suppose we are demonstrating a negative, the
mode is “Negative”, “Text”, “Auto exposure”, “Zoom in ratio 3X”,
and the image is clear. We are now saving this mode to MODE
“05”. Then next time when we need to demonstrate a negative,
just use “MODE RECALL” to call out MODE 05 directly and
demonstrate it. If the MODE are saved in MODE “DEFAULT”, then
next time when start the system, we can go to demonstrate the
negative straightly.
Note: MODE RECALL and MODE SAVE can only be carried out
through software; the path is “MENU”-”SETUP 2”-MODE
RECALL/ MODE SAVE.
Sketch map